Category :

in stock

Simple coat modeled on finds dated on X, XI and XII century. It has a shape of a rectangle in size about 150x110 cm. It is made of wool, without lining. It has no fastening, it can be fastened with a brooch (not included). ...

A headwear made of wool without the lining, with fringes, well fitted to the head. ...

A gambeson with horizontal seems below the waist, no collar. It's well fitted to the trunk. In the standard version, it's fastened at the front with 14 tin buttons and with 5 buttons on each sleeve; sleeves from shoulder to elbow are vertically patterned. Lethear straps for attaching the elements of...

A long gambeson modelled on the one from Biblia Maciejowskiego. It's put on over the head and fastened with two buttons on the neck. It is thicker than our other gambesons. ...

One long quilted glove - left or right. 1 piece! ...

Worn as a padding under the helmet....

A quilted hood worn under the helmet or the chain mail bonnet....

SALE: Last products in stock!...

SALE: Last products in stock!...

It is fit male garment made from four parts plus sleeves. It’s made from wool with a linen lining. In the standard version, price for the cottehardie includes ca. 30 tin moulded buttons....

A cotton cone made of 14 parts,( diameter approx. 3 meters) with a wooden folded mast(two parts)of 2,6 metres heigh with a set of steel pegs. We use cotton (about 340g/m2) with waterproof impregnatation....

This is the first type of a doublet. The basquine is longer then in the later type of doublet and reaches the buttocks. The doublet can be made only from linen or from wool with linen lining....

This 15th century gambeson is closed with leather laces and has a high collar. The fitted gambeson will work out perfectly as a soldier’s medieval gambeson.

Available models:
id 296 - natural, linen, measurements: A-77 cm, B-100 cm, C-59 cm

Early medieval gambeson. Padded in rhombus. Length to knee, sleeves 3/4. Without a collar. Fastened on the shoulder. ...

Archer gambeson of this type is an essential element of the archer clothing set. Our medieval gambeson is dated to the 15th century. It will work perfectly as an archer gambeson, but also as a late-medieval reenactment piece of clothing. ...

Long, loose gambeson with a slit on the back side. Wide sleeves. Standard version includes 4 bindings (leather straps). Can be used as the only protection or worn outside the armour. This type of gambeson was used during the whole of the 14th century....

Gambeson with vertical sewings starting from the waist, without the collar. This gambeson fits well to the body. Standard version of gambeson buttoned up with 15 buttons made of fabric. Sleeves with vertical sewings starting from the elbow to the wrist. 2 part cut of the sleeve provides better manoe...

Low profile medieval women's boots with slightly elongated tip. Our medieval women's shoes are based on numerous finds in western Europe, inter alia left shoe, from late XIV century, which is now in Museum of London. ...

Hand sewn mid height medieval shoes, made from natural cow leather. This medieval boots are fastened with two leather thongs. Our medieval shoes are based on XIV-XV century finds in Europe, for instance London or Gdańsk. ...

Hats felted of sheep fleece. All hand made. While ordering, please write the code of the model in additional information box....

A short hood made of wool with a linen lining with a short tail. ...

A pair of high medieval shoes for men. They are made of smooth vegetable-tanned leather of about 2 mm thickness. Machine-sewn medieval boots with glued sole - it prevents slipping, it's more durable and easier to repair. ...

A pair of high medieval shoes for men. They are made of smooth vegetable-tanned leather of about 2 mm thickness. Machine-sewn medieval boots with glued sole - it prevents slipping, it's more durable and easier to repair. ...

A pair of high medieval shoes for men. They are made of smooth vegetable-tanned leather of about 2 mm thickness. Machine-sewn medieval boots with glued styrogum sole - it prevents slipping, it's more durable and easier to repair. ...

The Italian long gambeson is one of the longest in our collection. The look of our aketon derives from 14th century designs from Northern Italy. Our Italian medieval gambeson is put on through the head. ...

Large hood with two endings, made of two types of woolen fabric of different colors. Each ending has two tiny bells fastened to the tip. ...

It is fit in trunk. Jopula is a male's garment made from four parts plus sleeves. At the bottom, it is long and with gores from hips down....

Helmet with a movable visor of a high quality 2mm spring steal. ...

The separate hose is laced – up in three places (attention: we DO NOT do the holes, because it requires trying on with the doublet). In the average and high standards, they are with linen lining and with full foot. ...

Late-medieval pourpoint from 14th and 15th century. Our gambeson is characterized by low weight, high mobility, and historical look. It's proper for both fighters and civilians....

Based on a French iconography, the late-medieval 14th-century pourpoint will prove itself both in combat and as civilian clothing. This medieval ...

The medieval German pourpoint is a replica of a 14th century gambeson based on German sources. Thanks to the use of new filling and cut-out, this ...

Medieval padded armor of Paris is a type of gambeson for historical reenactment. This medieval gambeson was presented in iconography from the 14th and 15th centuries. This clothing is closed with leather laces and has a collar. ...

A long medieval gambeson perfectly combines low weight, high mobility and historical look. Our medieval pourpoint will be a great choice for reenactors looking for a gambeson which will be convenient and based on historical sources. ...

A pair of long quilted gloves. ...

Quilted hose worn under the chain mail hose. It is with stapes....

Medieval gambeson from Arnstadt is an example of 14th century gambeson based on German historical sources. This model is characterized by lack of stitching on the torso.

Available models:
id 295 - natural, linen, measurements: A-76 cm, B-110 cm, C-59 cm

Medieval shoes reaching under the ankle, machine sewn. This type of medieval boots is made of smooth, vegetable-tanned leather of about 2 mm thickness. The sole, glued to the bottom of medieval shoes, is made of styrogum....

Medieval shoes with three straps are a great choice for any reenactor. Our medieval boots provide high comfort of wearing which will be appreciated by any fan of historical events.Medieval leather bootsof this type have three straps on each shoe. They are made of two layers of 2mm thick leather alto...

A cotte is a loose men's garment. It has a cut in front and at the back, long sleeves, the length reaching half-calf, without the lining. A cotte was worn in 13th and in early 14th c. ...

A cotte is a loose men's garment. It has a cut in front and at the back, long sleeves, the length reaching half-calf, without the lining. A cotte was worn in 13th and in early 14th c. ...

A cotte is a loose men's garment, let out from the waist by gussets. A cotte has a cut in front and at the back, long sleeves, the length until half calf, it's made with a lining....

Loose subjacent men's garment let out from the waist downwards with gores (in the front and in the back). Long sleeves. The cotte is half calf long and it is without a lining. It was worn in the 13th and in the beginning of the 14th century. ...

Loose subjacent men's garment let out from the waist downwards with gores (in the front and in the back). Long sleeves. The cotte is half calf long and it is without a lining. It was worn in the 13th and in the beginning of the 14th century. ...

A cotte is a loose men's garment, let out from the waist by gussets. A cotte has a cut in front and at the back, long sleeves, the length until half-calf, without the lining. A cotte was worn in 13th and in early 14th c....

Medieval shoes reaching under the ankle, machine sewn. This type of medieval boots is made of smooth, vegetable-tanned leather of about 2 mm thickness. The sole, glued to the bottom of medieval shoes, is made of styrogum....

This is the first type of a doublet. The basquine is longer then in the later type of doublet and reaches the buttocks. There is also a possibility to order a doublet which is fastened with buttons. The doublet can be made only from linen or from wool with linen lining....

Purpoint Sir Robert is a type of gambeson for any medieval fights lover. This medieval gambeson combines good mobility with light weight. As it is based on historical sources, one can wear it during reenactment events and HMBIA tournaments. ...

Quilted protection for the thighs reaching below the knees....

One quilted glove - left or right. 1 piece! ...

This type was used in 13th and in 1st half of 14th century. The price refers to a tunic in standard version (one colour, no applications). Tunic is made of wool with linen lining. For extra charge you can order applications or/and order a tunic in more than one colours....

This piece of padded armor from the Morgan Bible is a type of medieval gambeson characterized by a simple design and universality. It is dedicated for reenactors of the early-medieval period. This type of aketon is put on over the head and closed with two tin buttons on the left side of the neck. Bo...

A jack made of over a dozen layers of fabric (14 on the body and 8 on the arms). The internal layers can be linen or of cotton, the outside and lining are linen. In late middle ages it was used as an armour itself without any metal armour elements fastened to it. It is heavier and more rigid and du...

Thin quilted knee-long tunic with long sleeves and vertical seams. Simple cut of this tunic is based on a civil cotte. Pulled on over the head with no additional fastenings. From the hips down it is widened with wedges on the sides, cut on front and back. It has also small wedges under armpits to in...

Plain medieval belt is made of thick natural leather (~3 mm) of 2,7 cm width. It doesn't have ferrules, but it is finished with rounded tin buckle. Length of this leather belt is ~180 cm. ...

Purpoint Sir Robert is a type of gambeson for any medieval fights lover. This medieval gambeson combines good mobility with light weight. As it is based on historical sources, one can wear it during reenactment events and HMBIA tournaments. ...

This purpoint without quilting is a type of medieval gambeson designed for knight fighting. This model of medieval jacket can be worn during reenactment events and as camp gambeson. ...

A pair of standard quilted gloves....

For male, loose dress with turnup collar. The robe put on through the head, to be buttoned up under neck. Reaches to the knees. It is made from wool with linen lining. It's made up of four parts plus collar and sleeves. ...

An early-medieval gambeson, inspired by clothes from Rus and northern Europe. Made of linen, with thin filling and linen lining. Knee-long, widened with gussets on the sides from hips. It has long, narrowed at the end sleeves and gusset at the armpits, allowing free movement. It is closed with two l...

Quilted protection for the thighs reaching below the knees. It have rhombus stiched on the knees. ...

Quilted protection for the thighs reaching below the knees....

Simple vikings' hood. Made of wool with linen lining. Effectively protects the head and shoulders from cold wind and rain during historical reenactments. ...

Simple viking trousers, long, linen. Made of two pieces of fabric and a strap which holds the trousers at the waist. ...

A simple vikings' tunic made of wool or linen with no lining. It has four gussets widening it from the waist. Gussets at armpits allow free movement. The tunic is made of wool or linen, it has a linen hem around the neck, which ensures higher comfort of use. It has four gussets widening it from t...

A pair of rerebraces made of high-quality, spring steel plates (3cm wide) riveted to thick (ca 4 mm) leather. The metal plates are shaped and hardened to maximise their durability. The splint rerebraces are fastened with buckles and they have additional holes for fastening them onto the gambeson us...

A pair of vambraces made of high-quality, spring steel plates (3cm wide) riveted to thick (ca 4 mm) leather. The metal plates are shaped and hardened to maximise their durability. The splint vambraces are fastened with buckles and they have additional holes for fastening them onto the gambeson usin...

Thigh protection made of thick (~4mm) leather with riveted steel plates 3cm wide made of spring, hardened steel (1mm thick). Steel plates are specially shaped to maximise their durability. Steel rivets are used to attached plates to the leather. Fastened with two brass buckles. The protectors have...

Torse for helmet was a decoration worn by knights on helmets, inter alia during medieval tournaments. It played a decorative role, and its color referred to knight's coat of arms. It was decorated with hanging tongues in the back....

SALE: Last products in stock!...

SALE: Last products in stock!...

SALE: Last products in stock!...

Simple gown shown on variety of depictions, made of 2 main and 4 triangular pieces. It may be worn under other clothes or separately. The gown has a slit buttoned with 4 buttons...

Simple gown shown on variety of depictions, made of 2 main and 4 triangular pieces. It may be worn under other clothes or separately. The gown has a slit buttoned with 4 buttons (standard option)* ...

Quilted protection for the thighs reaching below the knees. ...

Woolen purpoint Sir Robert is an innovative gambeson created for HMB and knight fighting. Our medieval gambeson is dedicated for civil reenactors and sword fighting enthusiasts. This aketon will be a perfect choice for HMB tournaments competitors and medieval camping fans. ...